White deposits and dispenser residue Bosch SHPM65Z55N/01 Separate persistent white deposits from detergent-cover residue and record the product choices before any cleaning cycle. 1. Check white limescale on dishes and tub Status: Planned Reason: Establish the visible deposit condition and the empty-appliance preparation for any compatible cleaner. Continue / skip: Begin when persistent white deposits are visible after cooling. Skip a cleaner cycle if deposits are absent or cleaner compatibility cannot be confirmed. Stop: Stop if cookware remains inside before cleaner use, chemicals could mix or damage is present. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-limescale/ 2. Refill the rinse-aid reservoir Status: Planned Reason: Address a low rinse-aid reservoir as an independent condition. Continue / skip: Continue only when rinse aid is low and the proper product is available. Skip if it is already filled correctly. Stop: Stop if the reservoir or lid is damaged or the intended product is uncertain. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-rinse-aid/ 3. Clean a detergent cover that will not shut Status: Planned Reason: Clean accessible sticky cover guides only when the cover condition indicates a need. Continue / skip: Continue only for visible residue or a cover that resists normal closing, after the task’s safe preparation. Skip a clean cover that latches normally. Stop: Stop if the cover needs force, a latch is broken or the cleaned cover still will not shut. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-detergent-cover/ YOUR PLANNING RECORD A deposits and dispenser record: where white residue appears, compatible-cleaner decision, rinse-aid state, cover condition and a later normal-wash observation. Notes: ____________________ A plan status records an observation or decision. It does not complete the linked task or certify a repair. FULL TASK GUIDES Check white limescale on dishes and tub Bosch SHPM65Z55N/01 Region: US | Content version: 2.0.0 Distinguish persistent mineral deposits from loading or detergent problems. MODEL AND MANUAL Exact model: SHPM65Z55N/01 Top controls with Start / Reset 3 sec, Delay and AutoAir. Match the full E-Nr, including /01. Manual: 9001411746_D · (0007) 640A MV Excludes: SHPM65Z55N/20; SHPM65Z55N/24; SHPM65W55N; Other SHPM / SHXM variants PREPARATION [ ] Finish the wash and allow the machine to cool. [ ] Before a cleaner cycle, remove all cookware and utensils; cleaner with aluminum inside can create explosive hydrogen gas. [ ] Use only dishwasher-compatible cleaner according to its label; never mix chemicals. TOOLS - Soft cloth MATERIALS - Dishwasher-compatible cleaner if deposits are present FULL CHECKLIST 1. Record whether the white deposit is on the tub and rack wheels as well as dishes. Removable streaks on glasses alone also warrant the rinse-aid review; appearance alone does not establish water hardness. Source: Bosch SHPM65Z*** Operating instructions; pp. 6–7, 13–14, 27, 38, 45, 47 2. Check liquid rinse aid and the automatic dishwasher detergent used. Use water-supplier information when available instead of guessing hardness; do not add salt to the tub or invent a softener adjustment for this /01 task. Source: Bosch SHPM65Z*** Operating instructions; pp. 6–7, 13–14, 27, 38, 45, 47 3. If cleaning the dishwasher interior, remove every dish, utensil and foreign item first, especially aluminum. The manual warns that acidic or alkaline cleaners in contact with aluminum can release explosive hydrogen. Source: Bosch SHPM65Z*** Operating instructions; pp. 6–7, 13–14, 27, 38, 45, 47 4. Use one dishwasher-compatible cleaner according to its label, with the dishwasher empty. Never mix products, use harsh chemicals or abrade the stainless surface. Source: Bosch SHPM65Z*** Operating instructions; pp. 6–7, 13–14, 27, 38, 45, 47 5. After the cleaner cycle has finished and the interior is cool, compare the same tub or rack-wheel area. Persistent deposits or recurring poor washing warrant advice about the water supply and suitable detergent. Source: Bosch SHPM65Z*** Operating instructions; pp. 6–7, 13–14, 27, 38, 45, 47 STOP CONDITIONS - Stop using the dishwasher for smoke, a burning smell, damaged wiring, an active leak or water near electrical equipment. Isolate power and water only from a safe, dry, accessible location; otherwise keep clear and request qualified help. - Do not remove the pump cover, reach into the pump, open electrical panels, bypass the door interlock or move the installed dishwasher. Refer plumbing connections, installation and repairs to qualified service. - Stop if a part is cracked, jammed, sharp, insecure or different from the matching manual. Do not force a fitting or touch hot water. Never mix cleaning products. BRANCH CHECKS Begin with: Are the marks limited to removable spots or streaks on dishes? Are the marks limited to removable spots or streaks on dishes? Are the marks limited to removable spots or streaks on dishes? Record distribution before choosing a cleaning action. Follow checklist steps: 1 - Yes, no coating is visible inside the tub -> Observation and next step recorded. Use the rinse-aid or detergent task for the observed product or streaking clue before assuming the tub needs descaling. - A white coating is also visible on the tub or rack wheels -> Continue to: Are separate rinse aid and an appropriate dishwasher detergent in use?. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Are separate rinse aid and an appropriate dishwasher detergent in use? Are separate rinse aid and an appropriate dishwasher detergent in use? Review the products and water-supplier information before changing dose. Follow checklist steps: 2 - Both are appropriate for the load -> Continue to: Is every dish, utensil and foreign object removed?. - A product or rinse-aid correction is needed -> Observation and next step recorded. Use the rinse-aid or detergent task for the observed product or streaking clue before assuming the tub needs descaling. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Is every dish, utensil and foreign object removed? Is every dish, utensil and foreign object removed? Check all racks and the bottom before introducing a dishwasher cleaner. Follow checklist steps: 3 - The dishwasher is completely empty -> Continue to: Does the cleaner label explicitly permit dishwasher use?. - Something remains inside -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Does the cleaner label explicitly permit dishwasher use? Does the cleaner label explicitly permit dishwasher use? Use only one compatible product and its stated dose and cycle. Follow checklist steps: 4 - The product is compatible and its directions were followed -> Continue to: What changed on the same cooled surface after cleaning?. - Compatibility or directions are not established -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. What changed on the same cooled surface after cleaning? What changed on the same cooled surface after cleaning? A cleaner result does not certify the household water hardness. Follow checklist steps: 5 - The visible deposit reduced or cleared -> Observed result recorded. You recorded a reduction in the observed deposits after the compatible cleaner cycle. This is your observation, not independent confirmation of the appliance condition. - The coating persists or quickly returns -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. RESULT OBSERVATIONS - You recorded a reduction in the observed deposits after the compatible cleaner cycle. YOUR RECORD Observation date: ____________________ BEFORE Deposit pattern and products: ____________________ AFTER Same surface after the cleaner cycle: ____________________ Additional observations: ____________________ Result / reason for stopping: ____________________ Next action: ____________________ REMINDER Choose a reminder to review this observation when the symptom recurs or care is needed; no fixed day interval is assigned. Interval: Choose a personal interval; basis: user-selected Source: bosch-manual; pp. 6–7, 13–14, 27, 38, 45, 47 A calendar reminder is a personal plan, not a record of work completed. DIAGRAMS Conceptual observation map distinguishing food at accessible filters and door seal from a white coating on the tub; an empty interior is required before a cleaner cycle. https://csl-13-appliance-repair.pages.dev/diagrams/bosch-deposit.svg Original Homekeep schematic; conceptual identification and observation only, not an exact part drawing or official Bosch artwork SOURCES Bosch SHPM65Z*** Operating instructions | 9001411746_D · (0007) 640A MV | pp. 6–7, 13–14, 27, 38, 45, 47 https://media3.bsh-group.com/Documents/9001411746_D.pdf#page=47 Checked: 2026-10-13. Copyright BSH. Linked reference; original summaries only. No manual illustrations reproduced. Bosch SHPM65Z55N/01 appliance information | Live E-Nr /01 support page | Exact SHPM65Z55N/01 identity; associated operating instructions 9001411746_D https://www.bosch-home.com/us/en/productservice/SHPM65Z55N-01 Checked: 2026-10-13. Link only RELATED TASKS Refill the rinse-aid reservoir: https://csl-13-appliance-repair.pages.dev/tasks/bosch-rinse-aid/ Load the right detergent into the dry dispenser: https://csl-13-appliance-repair.pages.dev/tasks/bosch-detergent-dose/ Check food left on washed dishes: https://csl-13-appliance-repair.pages.dev/tasks/bosch-poor-cleaning/ Observations do not certify a physical repair. Follow your matching supplied manual and the stop conditions. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-limescale/ ======================================================== Refill the rinse-aid reservoir Bosch SHPM65Z55N/01 Region: US | Content version: 2.0.0 Fill only to the maximum mark, wipe spills and latch the lid. MODEL AND MANUAL Exact model: SHPM65Z55N/01 Top controls with Start / Reset 3 sec, Delay and AutoAir. Match the full E-Nr, including /01. Manual: 9001411746_D · (0007) 640A MV Excludes: SHPM65Z55N/20; SHPM65Z55N/24; SHPM65W55N; Other SHPM / SHXM variants PREPARATION [ ] Let the machine cool and stop the cycle before opening the door. [ ] Use liquid dishwasher rinse aid only, even if your detergent includes rinse aid. TOOLS - Soft cloth MATERIALS - Liquid dishwasher rinse aid FULL CHECKLIST 1. With the cycle stopped and the door cool, identify the rinse-aid dispenser and its low-rinse-aid indication. Keep it separate from the detergent cup. Source: Bosch SHPM65Z*** Operating instructions; pp. 7–8, 11, 13–14 2. Press the rinse-aid lid latch and open the cover. Add only liquid dishwasher rinse aid up to the full/maximum mark; avoid the air-vent hole and do not overfill. Source: Bosch SHPM65Z*** Operating instructions; pp. 7–8, 11, 13–14 3. Wipe up any spilled rinse aid with a damp cloth to avoid excess foam. Source: Bosch SHPM65Z*** Operating instructions; pp. 7–8, 11, 13–14 4. Close the lid until it clicks. Close the dishwasher door and allow a few moments for the low-rinse-aid indicator to update. Source: Bosch SHPM65Z*** Operating instructions; pp. 7–8, 11, 13–14 5. If the lid is damaged, the indicator stays on despite a verified fill, or a wrong product entered the reservoir, contact support without adding another chemical. Source: Bosch SHPM65Z*** Operating instructions; pp. 7–8, 11, 13–14 STOP CONDITIONS - Stop using the dishwasher for smoke, a burning smell, damaged wiring, an active leak or water near electrical equipment. Isolate power and water only from a safe, dry, accessible location; otherwise keep clear and request qualified help. - Do not remove the pump cover, reach into the pump, open electrical panels, bypass the door interlock or move the installed dishwasher. Refer plumbing connections, installation and repairs to qualified service. - Stop if a part is cracked, jammed, sharp, insecure or different from the matching manual. Do not force a fitting or touch hot water. Never mix cleaning products. BRANCH CHECKS Begin with: Is the rinse-aid reservoir already supplied? Is the rinse-aid reservoir already supplied? Is the rinse-aid reservoir already supplied? A lit Add Rinse Aid indicator is a reason to inspect the reservoir, not a reason to fill the detergent cup. Follow checklist steps: 1 - The reservoir is supplied and no refill is indicated -> Observation and next step recorded. The observed condition does not call for further steps in this task. Keep the record and choose a related task if a different symptom remains. No failed internal part has been diagnosed. - It is low or the Add Rinse Aid indicator is lit -> Continue to: Is the product liquid rinse aid made for dishwashers?. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Is the product liquid rinse aid made for dishwashers? Is the product liquid rinse aid made for dishwashers? Check the bottle before pouring; hand dish soap and detergent do not belong in this reservoir. Follow checklist steps: 2 - Yes, the product and reservoir are correct -> Continue to: Are spills removed and the rinse-aid lid latched?. - The product is wrong or was already poured into the wrong reservoir -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Are spills removed and the rinse-aid lid latched? Are spills removed and the rinse-aid lid latched? Fill only to the full mark and keep rinse aid out of the vent opening. Follow checklist steps: 2, 3, 4 - The fill is correct, spills are wiped and the lid clicks -> Continue to: Did the low-rinse-aid indication clear after closing the door?. - The lid is damaged or will not latch -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Did the low-rinse-aid indication clear after closing the door? Did the low-rinse-aid indication clear after closing the door? Allow a few moments after closing; do not keep topping up an already full reservoir. Follow checklist steps: 4, 5 - It cleared after the verified refill -> Observed result recorded. You recorded a correct refill, latched lid and cleared low-rinse-aid indication. This is your observation, not independent confirmation of the appliance condition. - It remains lit despite a verified full reservoir -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. RESULT OBSERVATIONS - You recorded a correct refill, latched lid and cleared low-rinse-aid indication. YOUR RECORD Observation date: ____________________ BEFORE Rinse-aid indication before filling: ____________________ AFTER Fill and lid check: ____________________ Additional observations: ____________________ Result / reason for stopping: ____________________ Next action: ____________________ REMINDER Choose a reminder to review this observation when the symptom recurs or care is needed; no fixed day interval is assigned. Interval: Choose a personal interval; basis: user-selected Source: bosch-manual; pp. 7–8, 11, 13–14 A calendar reminder is a personal plan, not a record of work completed. DIAGRAMS Conceptual distinction between the detergent cup with a flat tablet and the separate liquid rinse-aid reservoir; neither drawing gives exact component geometry. https://csl-13-appliance-repair.pages.dev/diagrams/bosch-dispensers.svg Original Homekeep schematic; conceptual identification and observation only, not an exact part drawing or official Bosch artwork SOURCES Bosch SHPM65Z*** Operating instructions | 9001411746_D · (0007) 640A MV | pp. 7–8, 11, 13–14 https://media3.bsh-group.com/Documents/9001411746_D.pdf#page=13 Checked: 2026-10-13. Copyright BSH. Linked reference; original summaries only. No manual illustrations reproduced. Bosch SHPM65Z55N/01 appliance information | Live E-Nr /01 support page | Exact SHPM65Z55N/01 identity; associated operating instructions 9001411746_D https://www.bosch-home.com/us/en/productservice/SHPM65Z55N-01 Checked: 2026-10-13. Link only RELATED TASKS Check dishes that stay wet: https://csl-13-appliance-repair.pages.dev/tasks/bosch-poor-drying/ Check white limescale on dishes and tub: https://csl-13-appliance-repair.pages.dev/tasks/bosch-limescale/ Observations do not certify a physical repair. Follow your matching supplied manual and the stop conditions. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-rinse-aid/ ======================================================== Clean a detergent cover that will not shut Bosch SHPM65Z55N/01 Region: US | Content version: 2.0.0 Remove sticky residue from the dispenser cover guides without forcing the latch. MODEL AND MANUAL Exact model: SHPM65Z55N/01 Top controls with Start / Reset 3 sec, Delay and AutoAir. Match the full E-Nr, including /01. Manual: 9001411746_D · (0007) 640A MV Excludes: SHPM65Z55N/20; SHPM65Z55N/24; SHPM65W55N; Other SHPM / SHXM variants PREPARATION [ ] End the cycle and let the interior cool. [ ] Turn off and safely disconnect power before cleaning. TOOLS - Soft damp cloth MATERIALS - Water FULL CHECKLIST 1. Empty any remaining detergent from the dispenser when it is safe to do so. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 27–28, 47 2. Inspect the cover guides for sticky detergent residue. Wipe the accessible guides with a soft damp cloth. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 27–28, 47 3. Gently slide and latch the cover as described in the manual. Do not force or pry it. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 27–28, 47 4. If it still will not close or a latch is damaged, stop and request service. Use only automatic dishwasher detergent in future washes. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 27–28, 47 STOP CONDITIONS - Stop using the dishwasher for smoke, a burning smell, damaged wiring, an active leak or water near electrical equipment. Isolate power and water only from a safe, dry, accessible location; otherwise keep clear and request qualified help. - Do not remove the pump cover, reach into the pump, open electrical panels, bypass the door interlock or move the installed dishwasher. Refer plumbing connections, installation and repairs to qualified service. - Stop if a part is cracked, jammed, sharp, insecure or different from the matching manual. Do not force a fitting or touch hot water. Never mix cleaning products. BRANCH CHECKS Begin with: Is the detergent cup clear of a tablet pressing against its cover? Is the detergent cup clear of a tablet pressing against its cover? Is the detergent cup clear of a tablet pressing against its cover? A tablet must lie flat in the dispenser, not stand on its side or sit in the separate tab tray. Follow checklist steps: 1 - The cup is empty or the tablet lies clear of the cover -> Continue to: Are the cover guides free of sticky detergent?. - A tablet or excess detergent obstructs the cover -> Continue to: Does clearing the contents let the cover slide and click?. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. - The cover already slides and clicks closed normally -> Observation and next step recorded. The observed condition does not call for further steps in this task. Keep the record and choose a related task if a different symptom remains. No failed internal part has been diagnosed. Does clearing the contents let the cover slide and click? Does clearing the contents let the cover slide and click? With the appliance cool and safely isolated, remove the obstruction without prying the latch. Follow checklist steps: 1, 3 - The cover closes normally -> Observed result recorded. You recorded normal detergent-cover movement and latching after removing the observed obstruction. This is your observation, not independent confirmation of the appliance condition. - It still resists closing -> Continue to: Are the cover guides free of sticky detergent?. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Are the cover guides free of sticky detergent? Are the cover guides free of sticky detergent? Look at accessible tracks; do not dismantle the dispenser. Follow checklist steps: 2 - No residue is visible but the cover still will not close -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - Sticky residue is visible on the guides -> Continue to: Did wiping the guides restore normal latching?. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Did wiping the guides restore normal latching? Did wiping the guides restore normal latching? Gently wipe with a damp cloth and slide the cover as shown in the manual. Follow checklist steps: 2, 3, 4 - The cleaned cover slides and clicks without force -> Observed result recorded. You recorded normal detergent-cover movement and latching after removing the observed obstruction. This is your observation, not independent confirmation of the appliance condition. - The latch is damaged or the cover still will not close -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. RESULT OBSERVATIONS - You recorded normal detergent-cover movement and latching after removing the observed obstruction. YOUR RECORD Observation date: ____________________ BEFORE Cover obstruction before cleaning: ____________________ AFTER Cover movement after correction: ____________________ Additional observations: ____________________ Result / reason for stopping: ____________________ Next action: ____________________ REMINDER Choose a reminder to review this observation when the symptom recurs or care is needed; no fixed day interval is assigned. Interval: Choose a personal interval; basis: user-selected Source: bosch-manual; pp. 8, 27–28, 47 A calendar reminder is a personal plan, not a record of work completed. DIAGRAMS Conceptual distinction between the detergent cup with a flat tablet and the separate liquid rinse-aid reservoir; neither drawing gives exact component geometry. https://csl-13-appliance-repair.pages.dev/diagrams/bosch-dispensers.svg Original Homekeep schematic; conceptual identification and observation only, not an exact part drawing or official Bosch artwork SOURCES Bosch SHPM65Z*** Operating instructions | 9001411746_D · (0007) 640A MV | pp. 8, 27–28, 47 https://media3.bsh-group.com/Documents/9001411746_D.pdf#page=47 Checked: 2026-10-13. Copyright BSH. Linked reference; original summaries only. No manual illustrations reproduced. Bosch SHPM65Z55N/01 appliance information | Live E-Nr /01 support page | Exact SHPM65Z55N/01 identity; associated operating instructions 9001411746_D https://www.bosch-home.com/us/en/productservice/SHPM65Z55N-01 Checked: 2026-10-13. Link only RELATED TASKS Load the right detergent into the dry dispenser: https://csl-13-appliance-repair.pages.dev/tasks/bosch-detergent-dose/ Check food left on washed dishes: https://csl-13-appliance-repair.pages.dev/tasks/bosch-poor-cleaning/ Observations do not certify a physical repair. Follow your matching supplied manual and the stop conditions. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-detergent-cover/