Wet dishes: compare the drying conditions Bosch SHPM65Z55N/01 Build a fair drying comparison using similar items and a completed cycle. Record whether the concern affects plastics, recessed items or the whole load. 1. Check dishes that stay wet Status: Planned Reason: Identify item type, loading and cycle-completion conditions that affect the drying observation. Continue / skip: Begin after a completed cycle and cooling. Skip this plan if the cycle was interrupted; resolve that condition first. Stop: Stop for hot steam, an incomplete cycle that cannot be safely resolved or damaged parts. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-poor-drying/ 2. Refill the rinse-aid reservoir Status: Planned Reason: Refill only when the reservoir or indicator shows that rinse aid is needed. Continue / skip: Continue when the reservoir is low and the correct liquid dishwasher rinse aid is available. Skip an adequately filled reservoir. Stop: Stop if the dispenser is damaged or the product cannot be confirmed as dishwasher rinse aid. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-rinse-aid/ 3. Check why AutoAir did not open the door Status: Planned Reason: Record the automatic-opening observation against the exact panel and selected cycle. Continue / skip: Continue only when AutoAir opening is part of the reported concern and the panel and manual match. Skip when no AutoAir concern exists. Stop: Stop for a jammed door or obstruction that cannot be safely cleared; do not force the opening mechanism. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-autoair/ YOUR PLANNING RECORD A drying comparison record with item type, pooled-water locations, cycle completion, rinse-aid action and the observed AutoAir state. Notes: ____________________ A plan status records an observation or decision. It does not complete the linked task or certify a repair. FULL TASK GUIDES Check dishes that stay wet Bosch SHPM65Z55N/01 Region: US | Content version: 2.0.0 Separate an unfinished cycle, water-holding shapes and wet plastics from a repeat drying problem on china or glass. MODEL AND MANUAL Exact model: SHPM65Z55N/01 Top controls with Start / Reset 3 sec, Delay and AutoAir. Match the full E-Nr, including /01. Manual: 9001411746_D · (0007) 640A MV Excludes: SHPM65Z55N/20; SHPM65Z55N/24; SHPM65W55N; Other SHPM / SHXM variants PREPARATION [ ] Let the cycle finish and dishes cool before unloading. [ ] Use only dishwasher rinse aid; do not add hand dish soap. [ ] Keep away from hot steam when opening a recently used dishwasher. TOOLS - No tools needed MATERIALS - Dishwasher rinse aid if the reservoir is empty FULL CHECKLIST 1. Record the selected cycle, completion evidence and which materials stayed wet. An unfinished wash cannot be used as a drying comparison. Source: Bosch SHPM65Z*** Operating instructions; pp. 13–14, 16, 34–37, 45–46 2. Check the rinse-aid supply. If low, use the rinse-aid refill task; wipe spills and latch the reservoir. Combination detergent does not replace liquid rinse aid in this manual. Source: Bosch SHPM65Z*** Operating instructions; pp. 13–14, 16, 34–37, 45–46 3. Angle concave items to let water drain and separate touching cutlery. Keep the spray paths open; use dishwasher-safe items only. Source: Bosch SHPM65Z*** Operating instructions; pp. 13–14, 16, 34–37, 45–46 4. Run an appropriate complete cycle with comparable items. The manual describes intensive drying on page 36; use its exact matching panel instructions if choosing that setting, and respect delicate-item limits. Source: Bosch SHPM65Z*** Operating instructions; pp. 13–14, 16, 34–37, 45–46 5. Let the dishes cool. Unload the lower rack first, then upper, then third rack so water from above does not wet dishes below. Compare plastics separately from china and glass. Source: Bosch SHPM65Z*** Operating instructions; pp. 13–14, 16, 34–37, 45–46 STOP CONDITIONS - Stop using the dishwasher for smoke, a burning smell, damaged wiring, an active leak or water near electrical equipment. Isolate power and water only from a safe, dry, accessible location; otherwise keep clear and request qualified help. - Do not remove the pump cover, reach into the pump, open electrical panels, bypass the door interlock or move the installed dishwasher. Refer plumbing connections, installation and repairs to qualified service. - Stop if a part is cracked, jammed, sharp, insecure or different from the matching manual. Do not force a fitting or touch hot water. Never mix cleaning products. BRANCH CHECKS Begin with: Was the wash allowed to finish before unloading? Was the wash allowed to finish before unloading? Was the wash allowed to finish before unloading? Look for cycle-end evidence; the manual uses 0:00. An unknown or interrupted cycle is not evidence of failed drying. Follow checklist steps: 1 - Yes, the cycle finished -> Continue to: Is liquid rinse aid available in the dispenser?. - No, it was opened or stopped early -> Observation and next step recorded. The observed cycle interruption or material/shape explains why this is not yet evidence of a drying fault. Correct the loading or let a suitable cycle finish before comparing. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Is liquid rinse aid available in the dispenser? Is liquid rinse aid available in the dispenser? Use the dedicated refill task if low; do not add detergent here. Follow checklist steps: 2 - The reservoir is supplied -> Continue to: Is water limited to plastics or upward-facing recesses?. - The reservoir is low or empty -> Continue to: Was rinse aid refilled with spills wiped and the lid latched?. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Was rinse aid refilled with spills wiped and the lid latched? Was rinse aid refilled with spills wiped and the lid latched? Finish the linked refill task before making a comparison wash. Follow checklist steps: 2 - Rinse aid is ready for the wash -> Continue to: Is water limited to plastics or upward-facing recesses?. - The lid will not close or the wrong product was added -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Is water limited to plastics or upward-facing recesses? Is water limited to plastics or upward-facing recesses? Plastic dries differently; pooled water in a base or rim is a loading clue. Follow checklist steps: 3 - No, similar china or glass is also wet -> Continue to: How did the completed comparison wash dry?. - Yes, only plastics or recesses hold water -> Observation and next step recorded. The observed cycle interruption or material/shape explains why this is not yet evidence of a drying fault. Correct the loading or let a suitable cycle finish before comparing. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. How did the completed comparison wash dry? How did the completed comparison wash dry? Compare the same types of items after correct loading and bottom-first unloading. Follow checklist steps: 4, 5 - China and glass are drier; remaining water is explained by item shape or plastic -> Observed result recorded. You recorded the drying result for comparable items after a complete cycle. This is your observation, not independent confirmation of the appliance condition. - Comparable china or glass remains wet after the full cycle -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. RESULT OBSERVATIONS - You recorded the drying result for comparable items after a complete cycle. YOUR RECORD Observation date: ____________________ BEFORE Wet items and cycle completion: ____________________ AFTER Comparable items after the next wash: ____________________ Additional observations: ____________________ Result / reason for stopping: ____________________ Next action: ____________________ REMINDER Choose a reminder to review this observation when the symptom recurs or care is needed; no fixed day interval is assigned. Interval: Choose a personal interval; basis: user-selected Source: bosch-manual; pp. 13–14, 16, 34–37, 45–46 A calendar reminder is a personal plan, not a record of work completed. DIAGRAMS Conceptual comparison of a level cup base holding water and an angled cup shedding water; compare plastics separately and unload the lower rack first. https://csl-13-appliance-repair.pages.dev/diagrams/bosch-drying.svg Original Homekeep schematic; conceptual identification and observation only, not an exact part drawing or official Bosch artwork SOURCES Bosch SHPM65Z*** Operating instructions | 9001411746_D · (0007) 640A MV | pp. 13–14, 16, 34–37, 45–46 https://media3.bsh-group.com/Documents/9001411746_D.pdf#page=46 Checked: 2026-10-13. Copyright BSH. Linked reference; original summaries only. No manual illustrations reproduced. Bosch SHPM65Z55N/01 appliance information | Live E-Nr /01 support page | Exact SHPM65Z55N/01 identity; associated operating instructions 9001411746_D https://www.bosch-home.com/us/en/productservice/SHPM65Z55N-01 Checked: 2026-10-13. Link only RELATED TASKS Refill the rinse-aid reservoir: https://csl-13-appliance-repair.pages.dev/tasks/bosch-rinse-aid/ Arrange a load with clear spray and vent paths: https://csl-13-appliance-repair.pages.dev/tasks/bosch-loading/ Check why AutoAir did not open the door: https://csl-13-appliance-repair.pages.dev/tasks/bosch-autoair/ Observations do not certify a physical repair. Follow your matching supplied manual and the stop conditions. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-poor-drying/ ======================================================== Refill the rinse-aid reservoir Bosch SHPM65Z55N/01 Region: US | Content version: 2.0.0 Fill only to the maximum mark, wipe spills and latch the lid. MODEL AND MANUAL Exact model: SHPM65Z55N/01 Top controls with Start / Reset 3 sec, Delay and AutoAir. Match the full E-Nr, including /01. Manual: 9001411746_D · (0007) 640A MV Excludes: SHPM65Z55N/20; SHPM65Z55N/24; SHPM65W55N; Other SHPM / SHXM variants PREPARATION [ ] Let the machine cool and stop the cycle before opening the door. [ ] Use liquid dishwasher rinse aid only, even if your detergent includes rinse aid. TOOLS - Soft cloth MATERIALS - Liquid dishwasher rinse aid FULL CHECKLIST 1. With the cycle stopped and the door cool, identify the rinse-aid dispenser and its low-rinse-aid indication. Keep it separate from the detergent cup. Source: Bosch SHPM65Z*** Operating instructions; pp. 7–8, 11, 13–14 2. Press the rinse-aid lid latch and open the cover. Add only liquid dishwasher rinse aid up to the full/maximum mark; avoid the air-vent hole and do not overfill. Source: Bosch SHPM65Z*** Operating instructions; pp. 7–8, 11, 13–14 3. Wipe up any spilled rinse aid with a damp cloth to avoid excess foam. Source: Bosch SHPM65Z*** Operating instructions; pp. 7–8, 11, 13–14 4. Close the lid until it clicks. Close the dishwasher door and allow a few moments for the low-rinse-aid indicator to update. Source: Bosch SHPM65Z*** Operating instructions; pp. 7–8, 11, 13–14 5. If the lid is damaged, the indicator stays on despite a verified fill, or a wrong product entered the reservoir, contact support without adding another chemical. Source: Bosch SHPM65Z*** Operating instructions; pp. 7–8, 11, 13–14 STOP CONDITIONS - Stop using the dishwasher for smoke, a burning smell, damaged wiring, an active leak or water near electrical equipment. Isolate power and water only from a safe, dry, accessible location; otherwise keep clear and request qualified help. - Do not remove the pump cover, reach into the pump, open electrical panels, bypass the door interlock or move the installed dishwasher. Refer plumbing connections, installation and repairs to qualified service. - Stop if a part is cracked, jammed, sharp, insecure or different from the matching manual. Do not force a fitting or touch hot water. Never mix cleaning products. BRANCH CHECKS Begin with: Is the rinse-aid reservoir already supplied? Is the rinse-aid reservoir already supplied? Is the rinse-aid reservoir already supplied? A lit Add Rinse Aid indicator is a reason to inspect the reservoir, not a reason to fill the detergent cup. Follow checklist steps: 1 - The reservoir is supplied and no refill is indicated -> Observation and next step recorded. The observed condition does not call for further steps in this task. Keep the record and choose a related task if a different symptom remains. No failed internal part has been diagnosed. - It is low or the Add Rinse Aid indicator is lit -> Continue to: Is the product liquid rinse aid made for dishwashers?. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Is the product liquid rinse aid made for dishwashers? Is the product liquid rinse aid made for dishwashers? Check the bottle before pouring; hand dish soap and detergent do not belong in this reservoir. Follow checklist steps: 2 - Yes, the product and reservoir are correct -> Continue to: Are spills removed and the rinse-aid lid latched?. - The product is wrong or was already poured into the wrong reservoir -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Are spills removed and the rinse-aid lid latched? Are spills removed and the rinse-aid lid latched? Fill only to the full mark and keep rinse aid out of the vent opening. Follow checklist steps: 2, 3, 4 - The fill is correct, spills are wiped and the lid clicks -> Continue to: Did the low-rinse-aid indication clear after closing the door?. - The lid is damaged or will not latch -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Did the low-rinse-aid indication clear after closing the door? Did the low-rinse-aid indication clear after closing the door? Allow a few moments after closing; do not keep topping up an already full reservoir. Follow checklist steps: 4, 5 - It cleared after the verified refill -> Observed result recorded. You recorded a correct refill, latched lid and cleared low-rinse-aid indication. This is your observation, not independent confirmation of the appliance condition. - It remains lit despite a verified full reservoir -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. RESULT OBSERVATIONS - You recorded a correct refill, latched lid and cleared low-rinse-aid indication. YOUR RECORD Observation date: ____________________ BEFORE Rinse-aid indication before filling: ____________________ AFTER Fill and lid check: ____________________ Additional observations: ____________________ Result / reason for stopping: ____________________ Next action: ____________________ REMINDER Choose a reminder to review this observation when the symptom recurs or care is needed; no fixed day interval is assigned. Interval: Choose a personal interval; basis: user-selected Source: bosch-manual; pp. 7–8, 11, 13–14 A calendar reminder is a personal plan, not a record of work completed. DIAGRAMS Conceptual distinction between the detergent cup with a flat tablet and the separate liquid rinse-aid reservoir; neither drawing gives exact component geometry. https://csl-13-appliance-repair.pages.dev/diagrams/bosch-dispensers.svg Original Homekeep schematic; conceptual identification and observation only, not an exact part drawing or official Bosch artwork SOURCES Bosch SHPM65Z*** Operating instructions | 9001411746_D · (0007) 640A MV | pp. 7–8, 11, 13–14 https://media3.bsh-group.com/Documents/9001411746_D.pdf#page=13 Checked: 2026-10-13. Copyright BSH. Linked reference; original summaries only. No manual illustrations reproduced. Bosch SHPM65Z55N/01 appliance information | Live E-Nr /01 support page | Exact SHPM65Z55N/01 identity; associated operating instructions 9001411746_D https://www.bosch-home.com/us/en/productservice/SHPM65Z55N-01 Checked: 2026-10-13. Link only RELATED TASKS Check dishes that stay wet: https://csl-13-appliance-repair.pages.dev/tasks/bosch-poor-drying/ Check white limescale on dishes and tub: https://csl-13-appliance-repair.pages.dev/tasks/bosch-limescale/ Observations do not certify a physical repair. Follow your matching supplied manual and the stop conditions. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-rinse-aid/ ======================================================== Check why AutoAir did not open the door Bosch SHPM65Z55N/01 Region: US | Content version: 2.0.0 Confirm cycle and option, then inspect the seal; leave hinge and installation work to service. MODEL AND MANUAL Exact model: SHPM65Z55N/01 Top controls with Start / Reset 3 sec, Delay and AutoAir. Match the full E-Nr, including /01. Manual: 9001411746_D · (0007) 640A MV Excludes: SHPM65Z55N/20; SHPM65Z55N/24; SHPM65W55N; Other SHPM / SHXM variants PREPARATION [ ] Wait for the cycle to finish and machine to cool. [ ] A door that slams shut or falls open needs service; do not operate with a faulty door mechanism. TOOLS - Soft damp cloth MATERIALS - Water FULL CHECKLIST 1. Confirm that AutoAir was enabled for a completed cycle. The rinse cycle does not automatically open the door. Follow the matching manual for its setting. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 37–38, 44 2. Check for visible dirt at the door and seal. Use the linked seal-cleaning task if needed, after disconnecting power safely. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 37–38, 44 3. Observe whether the cool door holds position halfway/fully open and closes gently when partly open. Stop using the unit if it slams or falls open. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 37–38, 44 4. If AutoAir still does not work, ask an installer or service technician to assess leveling and countertop clearance. Do not lower the unit, adjust hinges or change the installation here. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 37–38, 44 STOP CONDITIONS - Stop using the dishwasher for smoke, a burning smell, damaged wiring, an active leak or water near electrical equipment. Isolate power and water only from a safe, dry, accessible location; otherwise keep clear and request qualified help. - Do not remove the pump cover, reach into the pump, open electrical panels, bypass the door interlock or move the installed dishwasher. Refer plumbing connections, installation and repairs to qualified service. - Stop if a part is cracked, jammed, sharp, insecure or different from the matching manual. Do not force a fitting or touch hot water. Never mix cleaning products. BRANCH CHECKS Begin with: Was this a completed cycle other than Rinse? Was this a completed cycle other than Rinse? Was this a completed cycle other than Rinse? AutoAir opening is not expected for the Rinse cycle or before completion. Follow checklist steps: 1 - A non-Rinse cycle completed -> Continue to: Was AutoAir enabled using the matching manual?. - It was Rinse or the wash did not finish -> Observation and next step recorded. The cycle, disabled option or seal condition provides a next step. Complete that correction before assessing automatic opening; do not adjust hinges, leveling or countertop clearance yourself. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Was AutoAir enabled using the matching manual? Was AutoAir enabled using the matching manual? The feature is configurable. Do not infer its setting from the door staying closed. Follow checklist steps: 1 - The enabled setting is confirmed -> Continue to: Does the cool door hold halfway or fully open and close gently from partly open?. - The setting was off -> Observation and next step recorded. The cycle, disabled option or seal condition provides a next step. Complete that correction before assessing automatic opening; do not adjust hinges, leveling or countertop clearance yourself. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Does the cool door hold halfway or fully open and close gently from partly open? Does the cool door hold halfway or fully open and close gently from partly open? Keep clear of the door path. Do not use a door that slams shut or falls open. Follow checklist steps: 3 - Door movement matches these observations -> Continue to: Are the door edges and seal clean?. - The door slams, falls open or will not hold position -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Are the door edges and seal clean? Are the door edges and seal clean? Use the seal-cleaning task with power safely isolated if residue is visible. Follow checklist steps: 2 - The seal is clean or has been cleaned -> Continue to: Did AutoAir open the door after the next eligible completed cycle?. - Residue remains or the seal is damaged -> Observation and next step recorded. The cycle, disabled option or seal condition provides a next step. Complete that correction before assessing automatic opening; do not adjust hinges, leveling or countertop clearance yourself. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Did AutoAir open the door after the next eligible completed cycle? Did AutoAir open the door after the next eligible completed cycle? Keep the opening area clear; do not pull the door to imitate automatic release. Follow checklist steps: 4 - The door opened automatically -> Observed result recorded. You observed automatic opening after a completed eligible cycle. This is your observation, not independent confirmation of the appliance condition. - It stayed closed with AutoAir enabled -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. RESULT OBSERVATIONS - You observed automatic opening after a completed eligible cycle. YOUR RECORD Observation date: ____________________ BEFORE AutoAir conditions: ____________________ AFTER Door and eligible-cycle observations: ____________________ Additional observations: ____________________ Result / reason for stopping: ____________________ Next action: ____________________ REMINDER Choose a reminder to review this observation when the symptom recurs or care is needed; no fixed day interval is assigned. Interval: Choose a personal interval; basis: user-selected Source: bosch-manual; pp. 8, 37–38, 44 A calendar reminder is a personal plan, not a record of work completed. DIAGRAMS Conceptual door-seal inspection points and normal door-motion observations; no hinge adjustment or gasket-removal instructions. https://csl-13-appliance-repair.pages.dev/diagrams/bosch-door-seal.svg Original Homekeep schematic; conceptual identification and observation only, not an exact part drawing or official Bosch artwork SOURCES Bosch SHPM65Z*** Operating instructions | 9001411746_D · (0007) 640A MV | pp. 8, 37–38, 44 https://media3.bsh-group.com/Documents/9001411746_D.pdf#page=37 Checked: 2026-10-13. Copyright BSH. Linked reference; original summaries only. No manual illustrations reproduced. Bosch SHPM65Z55N/01 appliance information | Live E-Nr /01 support page | Exact SHPM65Z55N/01 identity; associated operating instructions 9001411746_D https://www.bosch-home.com/us/en/productservice/SHPM65Z55N-01 Checked: 2026-10-13. Link only RELATED TASKS Wipe the dishwasher door seal and edges: https://csl-13-appliance-repair.pages.dev/tasks/bosch-door-seal/ Check dishes that stay wet: https://csl-13-appliance-repair.pages.dev/tasks/bosch-poor-drying/ Observations do not certify a physical repair. Follow your matching supplied manual and the stop conditions. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-autoair/