Dishwasher start or interrupted cycle Bosch SHPM65Z55N/01 Record the control state and door event so a paused cycle is distinguished from a new cycle that never began. 1. Check a dishwasher that will not start Status: Planned Reason: Check normal display, selection, delay and secure closure for a new wash that has not started. Continue / skip: Begin when a powered machine will not start a newly selected cycle. Skip this step if a previously running cycle paused when the door opened. Stop: Stop for absent power, repeated breaker trips, damaged wiring or a door that will not latch normally. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-not-starting/ 2. Resume after opening the door Status: Planned Reason: Use the interrupted-cycle instructions only when the observed event was door opening during a running wash. Continue / skip: Continue only for an actual interrupted cycle with a matching control panel. Skip for a new-start problem with no interrupted wash. Stop: Stop for unsafe heat or steam, a failed latch or a cycle that does not resume after the manual’s control sequence. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-cycle-resume/ YOUR PLANNING RECORD A cycle-state handoff recording new start or interruption, display and delay observation, door event, control action and whether operation was later observed. Notes: ____________________ A plan status records an observation or decision. It does not complete the linked task or certify a repair. FULL TASK GUIDES Check a dishwasher that will not start Bosch SHPM65Z55N/01 Region: US | Content version: 2.0.0 Check door closure, cycle selection and delay before requesting service. MODEL AND MANUAL Exact model: SHPM65Z55N/01 Top controls with Start / Reset 3 sec, Delay and AutoAir. Match the full E-Nr, including /01. Manual: 9001411746_D · (0007) 640A MV Excludes: SHPM65Z55N/20; SHPM65Z55N/24; SHPM65W55N; Other SHPM / SHXM variants PREPARATION [ ] Use dry hands on normal controls; keep the appliance fully assembled. [ ] If power is absent, a breaker trips repeatedly or wiring is damaged, request qualified help. TOOLS - No tools needed MATERIALS - No materials needed FULL CHECKLIST 1. Open the cool door to expose the top controls, press On/Off and note whether the display responds. A hidden display with the door closed is not evidence of no power. Do not open electrical panels. Source: Bosch SHPM65Z*** Operating instructions; pp. 33–36, 44, 46 2. Check that a cycle can be selected. If a previous cycle prevents selection, use the separate cycle-reset task before choosing a new cycle. Source: Bosch SHPM65Z*** Operating instructions; pp. 33–36, 44, 46 3. Check the Delay setting. To cancel an unwanted delay, press Delay until its delay value is zero (h:00), then press Start to save. Do not confuse the delay value with a completed-cycle 0:00. Source: Bosch SHPM65Z*** Operating instructions; pp. 33–36, 44, 46 4. Check that no dish prevents closure and the door latches normally. Press Start and close the door within 4 seconds. If that interval is missed, press Start again and close within 4 seconds. Source: Bosch SHPM65Z*** Operating instructions; pp. 33–36, 44, 46 5. Observe whether the cycle begins from outside. If controls respond but the machine does not fill, use the external inlet check; if the door or controls remain unresponsive, request support. Source: Bosch SHPM65Z*** Operating instructions; pp. 33–36, 44, 46 STOP CONDITIONS - Stop using the dishwasher for smoke, a burning smell, damaged wiring, an active leak or water near electrical equipment. Isolate power and water only from a safe, dry, accessible location; otherwise keep clear and request qualified help. - Do not remove the pump cover, reach into the pump, open electrical panels, bypass the door interlock or move the installed dishwasher. Refer plumbing connections, installation and repairs to qualified service. - Stop if a part is cracked, jammed, sharp, insecure or different from the matching manual. Do not force a fitting or touch hot water. Never mix cleaning products. BRANCH CHECKS Begin with: Does the display respond with the top controls exposed? Does the display respond with the top controls exposed? Does the display respond with the top controls exposed? Use dry hands and On/Off. Do not reset a repeatedly tripping breaker or touch wiring. Follow checklist steps: 1 - The display responds -> Continue to: Can you select the intended cycle?. - There is no response or a breaker repeatedly trips -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Can you select the intended cycle? Can you select the intended cycle? An unfinished cycle can prevent a new selection. Follow checklist steps: 2 - The intended cycle can be selected -> Continue to: Is the Delay value zero for an immediate start?. - The previous cycle blocks selection -> Observation and next step recorded. Use the cycle-reset task if selection was blocked by a previous cycle, or the external inlet check if a selected cycle did not fill. No internal failure has been established. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Is the Delay value zero for an immediate start? Is the Delay value zero for an immediate start? Cancel an unwanted delay using the normal Delay and Start controls. Follow checklist steps: 3 - Delay is zero or has been canceled -> Continue to: Did the unobstructed door latch within 4 seconds after Start?. - The delay cannot be canceled as described -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Did the unobstructed door latch within 4 seconds after Start? Did the unobstructed door latch within 4 seconds after Start? A resistant latch is not a reason to push harder. Follow checklist steps: 4 - Yes, the door latched in time -> Continue to: Did a normal wash begin?. - The door will not latch or the Start prompt keeps returning -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Did a normal wash begin? Did a normal wash begin? Listen from outside; do not open a running wash merely to see the water. Follow checklist steps: 5 - The wash began normally -> Observed result recorded. You observed a wash begin after normal control and door checks. This is your observation, not independent confirmation of the appliance condition. - Controls respond but no filling or washing begins -> Observation and next step recorded. Use the cycle-reset task if selection was blocked by a previous cycle, or the external inlet check if a selected cycle did not fill. No internal failure has been established. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. RESULT OBSERVATIONS - You observed a wash begin after normal control and door checks. YOUR RECORD Observation date: ____________________ BEFORE Display and start conditions: ____________________ AFTER Response after normal controls: ____________________ Additional observations: ____________________ Result / reason for stopping: ____________________ Next action: ____________________ REMINDER Choose a reminder to review this observation when the symptom recurs or care is needed; no fixed day interval is assigned. Interval: Choose a personal interval; basis: user-selected Source: bosch-manual; pp. 33–36, 44, 46 A calendar reminder is a personal plan, not a record of work completed. DIAGRAMS Conceptual top-control sequence distinguishing Delay, Start and cycle reset: Start then close within 4 seconds; reset to 0:01 and allow about 1 minute to drain. https://csl-13-appliance-repair.pages.dev/diagrams/bosch-controls.svg Original Homekeep schematic; conceptual identification and observation only, not an exact part drawing or official Bosch artwork SOURCES Bosch SHPM65Z*** Operating instructions | 9001411746_D · (0007) 640A MV | pp. 33–36, 44, 46 https://media3.bsh-group.com/Documents/9001411746_D.pdf#page=44 Checked: 2026-10-13. Copyright BSH. Linked reference; original summaries only. No manual illustrations reproduced. Bosch SHPM65Z55N/01 appliance information | Live E-Nr /01 support page | Exact SHPM65Z55N/01 identity; associated operating instructions 9001411746_D https://www.bosch-home.com/us/en/productservice/SHPM65Z55N-01 Checked: 2026-10-13. Link only RELATED TASKS End a saved cycle and select a new one: https://csl-13-appliance-repair.pages.dev/tasks/bosch-cycle-reset/ Resume after opening the door: https://csl-13-appliance-repair.pages.dev/tasks/bosch-cycle-resume/ Check a dishwasher that is not filling: https://csl-13-appliance-repair.pages.dev/tasks/bosch-inlet-check/ Observations do not certify a physical repair. Follow your matching supplied manual and the stop conditions. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-not-starting/ ======================================================== Resume after opening the door Bosch SHPM65Z55N/01 Region: US | Content version: 2.0.0 Use Start again when door-opening protection has paused the cycle. MODEL AND MANUAL Exact model: SHPM65Z55N/01 Top controls with Start / Reset 3 sec, Delay and AutoAir. Match the full E-Nr, including /01. Manual: 9001411746_D · (0007) 640A MV Excludes: SHPM65Z55N/20; SHPM65Z55N/24; SHPM65W55N; Other SHPM / SHXM variants PREPARATION [ ] Keep clear of hot water and steam; wait until water sounds stop before fully opening. [ ] If a hot cycle was opened, leave the door ajar for several minutes before closing, as the manual warns about expansion. TOOLS - No tools needed MATERIALS - No materials needed FULL CHECKLIST 1. If the interrupted cycle is powered off, press On/Off again to continue the saved cycle. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 33, 35, 44 2. If the door stayed open more than 4 seconds after Start, the protection can pause operation. Press Start again. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 33, 35, 44 3. Close the door within 4 seconds and listen from outside for the cycle to resume. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 33, 35, 44 4. If the appliance will not resume with a correctly latched door, stop and request support; do not bypass the latch. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 33, 35, 44 STOP CONDITIONS - Stop using the dishwasher for smoke, a burning smell, damaged wiring, an active leak or water near electrical equipment. Isolate power and water only from a safe, dry, accessible location; otherwise keep clear and request qualified help. - Do not remove the pump cover, reach into the pump, open electrical panels, bypass the door interlock or move the installed dishwasher. Refer plumbing connections, installation and repairs to qualified service. - Stop if a part is cracked, jammed, sharp, insecure or different from the matching manual. Do not force a fitting or touch hot water. Never mix cleaning products. BRANCH CHECKS Begin with: Was this a running cycle interrupted by opening the door? Was this a running cycle interrupted by opening the door? Was this a running cycle interrupted by opening the door? This sequence resumes a saved wash; use the start task for a new wash. - Yes, the previously running cycle was interrupted -> Continue to: Has the hot-door precaution been completed?. - No, a new cycle has not started -> Observation and next step recorded. The observed condition does not call for further steps in this task. Keep the record and choose a related task if a different symptom remains. No failed internal part has been diagnosed. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Has the hot-door precaution been completed? Has the hot-door precaution been completed? Wait for water noises and steam to subside. If the machine was hot when opened, leave it ajar for several minutes before reclosing. - The door can now be handled safely -> Continue to: Does On/Off restore the saved cycle display if it was switched off?. - Steam or hot spraying is still present -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Does On/Off restore the saved cycle display if it was switched off? Does On/Off restore the saved cycle display if it was switched off? Do not hold Reset when the intention is to continue the saved wash. Follow checklist steps: 1 - The saved cycle is shown -> Continue to: Did you press Start and latch the door within 4 seconds?. - The controls remain unresponsive -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Did you press Start and latch the door within 4 seconds? Did you press Start and latch the door within 4 seconds? If the timing was missed, repeat Start once and close within the stated interval. Follow checklist steps: 2, 3 - Start was pressed and the door latched in time -> Continue to: Did the interrupted wash resume?. - The unobstructed door will not latch normally -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Did the interrupted wash resume? Did the interrupted wash resume? Observe from outside; a resumed cycle is not the same as a finished wash. Follow checklist steps: 4 - The interrupted wash resumed -> Observed result recorded. You observed the interrupted cycle resume. Allow it to finish before assessing cleaning or drying. This is your observation, not independent confirmation of the appliance condition. - It remains paused despite correct control and door operation -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. RESULT OBSERVATIONS - You observed the interrupted cycle resume. Allow it to finish before assessing cleaning or drying. YOUR RECORD Observation date: ____________________ BEFORE Interruption details: ____________________ AFTER Resume observation: ____________________ Additional observations: ____________________ Result / reason for stopping: ____________________ Next action: ____________________ REMINDER Choose a reminder to review this observation when the symptom recurs or care is needed; no fixed day interval is assigned. Interval: Choose a personal interval; basis: user-selected Source: bosch-manual; pp. 8, 33, 35, 44 A calendar reminder is a personal plan, not a record of work completed. DIAGRAMS Conceptual top-control sequence distinguishing Delay, Start and cycle reset: Start then close within 4 seconds; reset to 0:01 and allow about 1 minute to drain. https://csl-13-appliance-repair.pages.dev/diagrams/bosch-controls.svg Original Homekeep schematic; conceptual identification and observation only, not an exact part drawing or official Bosch artwork SOURCES Bosch SHPM65Z*** Operating instructions | 9001411746_D · (0007) 640A MV | pp. 8, 33, 35, 44 https://media3.bsh-group.com/Documents/9001411746_D.pdf#page=35 Checked: 2026-10-13. Copyright BSH. Linked reference; original summaries only. No manual illustrations reproduced. Bosch SHPM65Z55N/01 appliance information | Live E-Nr /01 support page | Exact SHPM65Z55N/01 identity; associated operating instructions 9001411746_D https://www.bosch-home.com/us/en/productservice/SHPM65Z55N-01 Checked: 2026-10-13. Link only RELATED TASKS Check a dishwasher that will not start: https://csl-13-appliance-repair.pages.dev/tasks/bosch-not-starting/ End a saved cycle and select a new one: https://csl-13-appliance-repair.pages.dev/tasks/bosch-cycle-reset/ Observations do not certify a physical repair. Follow your matching supplied manual and the stop conditions. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-cycle-resume/