Food left on dishes: loading to spray Bosch SHPM65Z55N/01 Plan a comparison of a completed wash with the next appropriate normal wash, recording only maintenance supported by visible findings. 1. Check food left on washed dishes Status: Planned Reason: Review loading, cycle completion and visible maintenance needs before cleaning parts. Continue / skip: Begin after a completed wash leaves food soil and the contents have cooled. Skip this plan if no poor-cleaning symptom is present. Stop: Stop if parts are damaged, the cycle cannot complete safely or internal access would be required. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-poor-cleaning/ 2. Clean and lock the dishwasher filters Status: Planned Reason: Restore a visibly dirty or incorrectly seated user-accessible filter before further wash observations. Continue / skip: Continue only if the inspection indicates filter debris or a seating problem and the separate preparation is met. Skip a clean, correctly locked filter. Stop: Stop for sharp debris that cannot be removed safely, damaged filter parts or locking arrows that cannot align. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-filter-clean/ 3. Inspect and clean the spray arms Status: Planned Reason: Resolve visible deposits or obstructions after the loading and filter checks. Continue / skip: Continue only for a visible arm or nozzle issue with cooled contents and safely isolated power. Skip arms that are clear and move freely. Stop: Stop if a fitting differs from the manual, resists removal or does not secure correctly on refitting. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-spray-arms/ YOUR PLANNING RECORD A wash-quality comparison listing loading changes, filter seating, arm clearance, actions skipped and the observed result of the next safe normal wash. Notes: ____________________ A plan status records an observation or decision. It does not complete the linked task or certify a repair. FULL TASK GUIDES Check food left on washed dishes Bosch SHPM65Z55N/01 Region: US | Content version: 2.0.0 Separate loading, filter and spray-arm issues before considering internal faults. MODEL AND MANUAL Exact model: SHPM65Z55N/01 Top controls with Start / Reset 3 sec, Delay and AutoAir. Match the full E-Nr, including /01. Manual: 9001411746_D · (0007) 640A MV Excludes: SHPM65Z55N/20; SHPM65Z55N/24; SHPM65W55N; Other SHPM / SHXM variants PREPARATION [ ] Finish the cycle and let the contents cool. [ ] Disconnect power for hands-on cleaning; restore it only after all parts are refitted. TOOLS - No tools for loading checks MATERIALS - Automatic dishwasher detergent for the next wash FULL CHECKLIST 1. Check that dishes are spaced rather than nested. Reposition tall items so the spray arms can move freely. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 15–16, 27–31, 39–40, 45 2. Check filter seating and visible debris. Use the linked filter task if cleaning is needed, then align the locking arrows. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 15–16, 27–31, 39–40, 45 3. Inspect spray-arm nozzles and clearance. Use the linked arm-maintenance task rather than dismantling anything else. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 15–16, 27–31, 39–40, 45 4. Review the wash cycle and detergent for the soil level and dish-care labels. An appropriate more intensive cycle may help stubborn soil. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 15–16, 27–31, 39–40, 45 5. Check the next normal wash. Persistent poor cleaning with correct loading and user-maintained parts needs support. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 15–16, 27–31, 39–40, 45 STOP CONDITIONS - Stop using the dishwasher for smoke, a burning smell, damaged wiring, an active leak or water near electrical equipment. Isolate power and water only from a safe, dry, accessible location; otherwise keep clear and request qualified help. - Do not remove the pump cover, reach into the pump, open electrical panels, bypass the door interlock or move the installed dishwasher. Refer plumbing connections, installation and repairs to qualified service. - Stop if a part is cracked, jammed, sharp, insecure or different from the matching manual. Do not force a fitting or touch hot water. Never mix cleaning products. BRANCH CHECKS Begin with: Are dishes spaced and open to both spray paths? Are dishes spaced and open to both spray paths? Are dishes spaced and open to both spray paths? Record whether residue appears throughout the load or only behind a large item. Follow checklist steps: 1 - Items are spaced and the arms have clearance -> Continue to: Are the visible filters clean and locked?. - Nested dishes or blocked spray paths are visible -> Continue to: Has the obstructed loading been corrected?. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Has the obstructed loading been corrected? Has the obstructed loading been corrected? Face item interiors toward the spray and push the upper rack fully home. Follow checklist steps: 1 - The loading now leaves the spray paths clear -> Continue to: Are the visible filters clean and locked?. - Items cannot be loaded securely with clear spray paths -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Are the visible filters clean and locked? Are the visible filters clean and locked? Use the complete filter task if dirty or loose; restore all parts before a wash. Follow checklist steps: 2 - Filters look clean and their arrows align -> Continue to: Are both spray arms clear and free to turn?. - Food, damage or an unseated filter is present -> Observation and next step recorded. A filter or spray-arm condition needs its dedicated maintenance task before comparing another wash. This observation does not identify a failed internal part. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Are both spray arms clear and free to turn? Are both spray arms clear and free to turn? Use the separate arm task for deposits or an insecure fitting. Follow checklist steps: 3 - No nozzle deposit or arm obstruction is visible -> Continue to: Were the cycle and dishwasher detergent appropriate for this load?. - An arm or its nozzles need attention -> Observation and next step recorded. A filter or spray-arm condition needs its dedicated maintenance task before comparing another wash. This observation does not identify a failed internal part. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Were the cycle and dishwasher detergent appropriate for this load? Were the cycle and dishwasher detergent appropriate for this load? Consider soil level, water hardness and item-care labels; do not prescribe a hotter cycle for heat-sensitive items. Follow checklist steps: 4 - Cycle and detergent match the load -> Continue to: What did a complete comparison wash show?. - The cycle or detergent needs a suitable correction -> Continue to: What did a complete comparison wash show?. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. What did a complete comparison wash show? What did a complete comparison wash show? Record the chosen cycle, detergent and the same kind of residue on similar dishes. Follow checklist steps: 4, 5 - The comparison items came out clean -> Observed result recorded. You recorded clean comparison items after correcting the observed wash conditions. This is your observation, not independent confirmation of the appliance condition. - Food remains despite corrected user conditions -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. RESULT OBSERVATIONS - You recorded clean comparison items after correcting the observed wash conditions. YOUR RECORD Observation date: ____________________ BEFORE Residue pattern and wash setup: ____________________ AFTER Comparison wash result: ____________________ Additional observations: ____________________ Result / reason for stopping: ____________________ Next action: ____________________ REMINDER Choose a reminder to review this observation when the symptom recurs or care is needed; no fixed day interval is assigned. Interval: Choose a personal interval; basis: user-selected Source: bosch-manual; pp. 8, 15–16, 27–31, 39–40, 45 A calendar reminder is a personal plan, not a record of work completed. DIAGRAMS Conceptual spray-arm paths showing a protruding utensil blocking rotation and a clear load after repositioning. https://csl-13-appliance-repair.pages.dev/diagrams/bosch-spray-path.svg Original Homekeep schematic; conceptual identification and observation only, not an exact part drawing or official Bosch artwork SOURCES Bosch SHPM65Z*** Operating instructions | 9001411746_D · (0007) 640A MV | pp. 8, 15–16, 27–31, 39–40, 45 https://media3.bsh-group.com/Documents/9001411746_D.pdf#page=45 Checked: 2026-10-13. Copyright BSH. Linked reference; original summaries only. No manual illustrations reproduced. Bosch SHPM65Z55N/01 appliance information | Live E-Nr /01 support page | Exact SHPM65Z55N/01 identity; associated operating instructions 9001411746_D https://www.bosch-home.com/us/en/productservice/SHPM65Z55N-01 Checked: 2026-10-13. Link only RELATED TASKS Arrange a load with clear spray and vent paths: https://csl-13-appliance-repair.pages.dev/tasks/bosch-loading/ Clean and lock the dishwasher filters: https://csl-13-appliance-repair.pages.dev/tasks/bosch-filter-clean/ Inspect and clean the spray arms: https://csl-13-appliance-repair.pages.dev/tasks/bosch-spray-arms/ Load the right detergent into the dry dispenser: https://csl-13-appliance-repair.pages.dev/tasks/bosch-detergent-dose/ Observations do not certify a physical repair. Follow your matching supplied manual and the stop conditions. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-poor-cleaning/ ======================================================== Clean and lock the dishwasher filters Bosch SHPM65Z55N/01 Region: US | Content version: 2.0.0 Check the three filter parts, remove food residue and verify the locking arrows before comparing the next wash. MODEL AND MANUAL Exact model: SHPM65Z55N/01 Top controls with Start / Reset 3 sec, Delay and AutoAir. Match the full E-Nr, including /01. Manual: 9001411746_D · (0007) 640A MV Excludes: SHPM65Z55N/20; SHPM65Z55N/24; SHPM65W55N; Other SHPM / SHXM variants PREPARATION [ ] End the cycle, let the interior and water cool, and remove the lower rack. [ ] For hands-on cleaning, switch off and isolate the incoming power at the known, safely accessible dry disconnect. If you do not know the isolation method, ask your installer; do not remove a panel or pull out the dishwasher. Restore power only after reassembly and with dry hands and floor. [ ] Use caution around glass or other sharp debris. Do not reach below the filter opening. TOOLS - Soft brush - Protective gloves MATERIALS - Running water FULL CHECKLIST 1. Inspect the large-object trap and filter surface for food, grit and damage. Record whether this follows a heavily soiled or starchy load. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 38–40, 45–46 2. Unscrew the large-object trap and lift out the complete filter assembly. Stop for inaccessible glass or any fitting that resists normal release. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 38–40, 45–46 3. Separate the microfilter from the flat fine filter. Rinse all three parts under running water with a soft brush; use no steel wool or abrasive brush. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 38–40, 45–46 4. Inspect the rinsed mesh and seals for visible damage. A cracked or damaged filter needs service before reuse. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 38–40, 45–46 5. Reassemble in reverse order and screw the large-object trap into place until the marked arrows align. Refit the lower rack. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 38–40, 45–46 6. After reassembly and safe power restoration, observe the next normal wash for drainage and grit on similar dishes. Do not run with a loose filter. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 38–40, 45–46 STOP CONDITIONS - Stop using the dishwasher for smoke, a burning smell, damaged wiring, an active leak or water near electrical equipment. Isolate power and water only from a safe, dry, accessible location; otherwise keep clear and request qualified help. - Do not remove the pump cover, reach into the pump, open electrical panels, bypass the door interlock or move the installed dishwasher. Refer plumbing connections, installation and repairs to qualified service. - Stop if a part is cracked, jammed, sharp, insecure or different from the matching manual. Do not force a fitting or touch hot water. Never mix cleaning products. BRANCH CHECKS Begin with: What is visible on the cool filter system? What is visible on the cool filter system? What is visible on the cool filter system? Inspect only after the preparation steps. A recent heavy starch load is also a cleaning trigger. Follow checklist steps: 1 - The filters are clean and no cleaning trigger is present -> Observation and next step recorded. The observed condition does not call for further steps in this task. Keep the record and choose a related task if a different symptom remains. No failed internal part has been diagnosed. - Food, grit or a heavy-soil cleaning trigger is present -> Continue to: Did the complete assembly release normally?. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Did the complete assembly release normally? Did the complete assembly release normally? Do not probe into the opening or force the trap. Follow checklist steps: 2 - The assembly lifted out safely -> Continue to: Are the rinsed filter parts intact?. - It resists, or sharp debris cannot be handled safely -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Are the rinsed filter parts intact? Are the rinsed filter parts intact? Inspect all three parts after gentle rinsing. Follow checklist steps: 3, 4 - The mesh and parts are intact and clean -> Continue to: Do the locking arrows align with the assembly seated?. - Damage or an obstruction remains -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Do the locking arrows align with the assembly seated? Do the locking arrows align with the assembly seated? A clean filter still needs to be locked before use. Follow checklist steps: 5 - The arrows align and the filter is seated -> Continue to: What happened in the next normal wash?. - It will not seat or lock normally -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. What happened in the next normal wash? What happened in the next normal wash? Compare drainage and grit after the complete cycle; stop immediately for leakage. Follow checklist steps: 6 - Drainage and the dish surfaces look normal -> Observed result recorded. You recorded clean, intact, locked filters and a satisfactory next wash. This is your observation, not independent confirmation of the appliance condition. - Grit, poor drainage or leakage remains -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. RESULT OBSERVATIONS - You recorded clean, intact, locked filters and a satisfactory next wash. YOUR RECORD Observation date: ____________________ BEFORE Filter soil before cleaning: ____________________ AFTER Filter lock and next wash: ____________________ Additional observations: ____________________ Result / reason for stopping: ____________________ Next action: ____________________ REMINDER For every-other-day use with scraped dishes: 3–6 cleanings per year for light/average use, 8–12 for heavy use; also after heavy food or starch loads. Interval: Choose a personal interval; basis: manufacturer Source: bosch-manual; p. 39 A calendar reminder is a personal plan, not a record of work completed. DIAGRAMS Conceptual exploded filter identification: large-object trap, flat fine filter and microfilter; compare residue before cleaning with aligned locking arrows after refitting. https://csl-13-appliance-repair.pages.dev/diagrams/bosch-filter.svg Original Homekeep schematic; conceptual identification and observation only, not an exact part drawing or official Bosch artwork SOURCES Bosch SHPM65Z*** Operating instructions | 9001411746_D · (0007) 640A MV | pp. 8, 38–40, 45–46 https://media3.bsh-group.com/Documents/9001411746_D.pdf#page=39 Checked: 2026-10-13. Copyright BSH. Linked reference; original summaries only. No manual illustrations reproduced. Bosch SHPM65Z55N/01 appliance information | Live E-Nr /01 support page | Exact SHPM65Z55N/01 identity; associated operating instructions 9001411746_D https://www.bosch-home.com/us/en/productservice/SHPM65Z55N-01 Checked: 2026-10-13. Link only RELATED TASKS Check standing water after a cycle: https://csl-13-appliance-repair.pages.dev/tasks/bosch-standing-water/ Check food left on washed dishes: https://csl-13-appliance-repair.pages.dev/tasks/bosch-poor-cleaning/ Trace dishwasher odor to visible residue or drainage: https://csl-13-appliance-repair.pages.dev/tasks/bosch-odor/ Observations do not certify a physical repair. Follow your matching supplied manual and the stop conditions. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-filter-clean/ ======================================================== Inspect and clean the spray arms Bosch SHPM65Z55N/01 Region: US | Content version: 2.0.0 Remove the upper and lower user-accessible arms, inspect deposits and restore free movement. MODEL AND MANUAL Exact model: SHPM65Z55N/01 Top controls with Start / Reset 3 sec, Delay and AutoAir. Match the full E-Nr, including /01. Manual: 9001411746_D · (0007) 640A MV Excludes: SHPM65Z55N/20; SHPM65Z55N/24; SHPM65W55N; Other SHPM / SHXM variants PREPARATION [ ] End the cycle; let dishes and interior cool. [ ] Switch off and safely disconnect power for hands-on work. [ ] Remove dishes and rack obstructions; watch for sharp items. TOOLS - Soft cloth MATERIALS - Water - Dishwasher-compatible cleaner if deposits require it FULL CHECKLIST 1. With the dishwasher cool and safely isolated, inspect the upper and lower arms for grease, scale and blocked nozzle openings. Note whether a dish, handle or utensil crosses either rotation path. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 16, 38, 40, 45 2. Remove loading obstructions and gently turn the arms by hand. A stiff arm must not be forced. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 16, 38, 40, 45 3. If deposits require arm removal, follow page 40: unscrew the upper arm and pull off the lower arm. Stop if the mounting differs or resists normal removal. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 16, 38, 40, 45 4. Rinse accessible deposits from the removed arms without enlarging nozzle holes or inserting sharp tools. For a separate dishwasher-cleaner cycle, remove all cookware and utensils and follow the product label. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 16, 38, 40, 45 5. If the arms were removed, refit them to their original mounts. Confirm both arms are secure, return the upper rack fully to its rear water connection and check free rotation. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 16, 38, 40, 45 6. Restore power only after reassembly. Check the next suitable wash for renewed residue; persistent poor spray or insecure fittings require service. Source: Bosch SHPM65Z*** Operating instructions; pp. 8, 16, 38, 40, 45 STOP CONDITIONS - Stop using the dishwasher for smoke, a burning smell, damaged wiring, an active leak or water near electrical equipment. Isolate power and water only from a safe, dry, accessible location; otherwise keep clear and request qualified help. - Do not remove the pump cover, reach into the pump, open electrical panels, bypass the door interlock or move the installed dishwasher. Refer plumbing connections, installation and repairs to qualified service. - Stop if a part is cracked, jammed, sharp, insecure or different from the matching manual. Do not force a fitting or touch hot water. Never mix cleaning products. BRANCH CHECKS Begin with: Do loaded items leave both spray paths clear? Do loaded items leave both spray paths clear? Do loaded items leave both spray paths clear? A utensil through the rack can stop an otherwise clean arm. Follow checklist steps: 1, 2 - Both paths are clear -> Continue to: Are the visible nozzle openings free of deposits?. - An item crosses a spray path -> Continue to: Do both arms turn freely after repositioning the items?. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. - The arms are clear and there is no current cleaning or contact-noise symptom -> Observation and next step recorded. The observed condition does not call for further steps in this task. Keep the record and choose a related task if a different symptom remains. No failed internal part has been diagnosed. Do both arms turn freely after repositioning the items? Do both arms turn freely after repositioning the items? Move the dishes, then turn the arms gently with power isolated. Follow checklist steps: 2 - The obstruction is gone and the arms turn -> Continue to: Are the visible nozzle openings free of deposits?. - An arm still binds without contact -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Are the visible nozzle openings free of deposits? Are the visible nozzle openings free of deposits? Inspect grease or scale only where visible; do not infer an internal pump problem. Follow checklist steps: 1 - The openings look clear -> Continue to: What did the next completed wash show?. - Deposits are visible -> Continue to: Could the arms be cleaned and securely refitted?. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. Could the arms be cleaned and securely refitted? Could the arms be cleaned and securely refitted? Use only the two user-accessible arm fittings described in the manual. Follow checklist steps: 3, 4, 5 - Both arms are clean, secured and turn freely -> Continue to: What did the next completed wash show?. - Removal, cleaning or refitting could not be completed safely -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. What did the next completed wash show? What did the next completed wash show? Confirm the rack is fully home before testing. Follow checklist steps: 5, 6 - The load washed normally with clear spray paths -> Observed result recorded. You recorded clear spray paths, secure arms and the result of the next wash. This is your observation, not independent confirmation of the appliance condition. - Poor washing or arm-contact noise remains -> Pause and request qualified help. The observed condition needs qualified help. Keep the appliance out of use when a safety concern remains. Share the exact model, displayed message and your before/after observations; do not open panels, bypass a lock or access the pump. - I have not checked this, or cannot observe it safely -> Observation still needed. This check is not complete. A condition you have not observed is still unknown. Save the record and return when the preparation and observation can be completed safely; ask support if safe access is uncertain. RESULT OBSERVATIONS - You recorded clear spray paths, secure arms and the result of the next wash. YOUR RECORD Observation date: ____________________ BEFORE Spray-path and nozzle observations: ____________________ AFTER Refitting and comparison wash: ____________________ Additional observations: ____________________ Result / reason for stopping: ____________________ Next action: ____________________ REMINDER Choose a reminder to review this observation when the symptom recurs or care is needed; no fixed day interval is assigned. Interval: Choose a personal interval; basis: user-selected Source: bosch-manual; pp. 8, 16, 38, 40, 45 A calendar reminder is a personal plan, not a record of work completed. DIAGRAMS Conceptual spray-arm paths showing a protruding utensil blocking rotation and a clear load after repositioning. https://csl-13-appliance-repair.pages.dev/diagrams/bosch-spray-path.svg Original Homekeep schematic; conceptual identification and observation only, not an exact part drawing or official Bosch artwork SOURCES Bosch SHPM65Z*** Operating instructions | 9001411746_D · (0007) 640A MV | pp. 8, 16, 38, 40, 45 https://media3.bsh-group.com/Documents/9001411746_D.pdf#page=40 Checked: 2026-10-13. Copyright BSH. Linked reference; original summaries only. No manual illustrations reproduced. Bosch SHPM65Z55N/01 appliance information | Live E-Nr /01 support page | Exact SHPM65Z55N/01 identity; associated operating instructions 9001411746_D https://www.bosch-home.com/us/en/productservice/SHPM65Z55N-01 Checked: 2026-10-13. Link only RELATED TASKS Arrange a load with clear spray and vent paths: https://csl-13-appliance-repair.pages.dev/tasks/bosch-loading/ Stop dishes rattling against the spray arms: https://csl-13-appliance-repair.pages.dev/tasks/bosch-rattling/ Check food left on washed dishes: https://csl-13-appliance-repair.pages.dev/tasks/bosch-poor-cleaning/ Observations do not certify a physical repair. Follow your matching supplied manual and the stop conditions. Guide: https://csl-13-appliance-repair.pages.dev/tasks/bosch-spray-arms/